The SkyView COM Radio will change the way you use an aircraft radio

By integrating deeply with your Dynon SkyView system, the SkyView COM Radio tunes frequencies by airport and station type - rather than by spinning in a number - at the touch of a button. You can also send frequencies over from the SkyView map airport info pages. For when you're feeling nostalgic (or are following ATC instructions), a dual concentric knob lets you spin in frequencies "the old fashioned way." SkyView will identify the airport and station type as you tune to help ensure you're talking to the right radio station. The SV-COM-760 has 25 kHz channel spacing only. The SV-COM-T8 adds 8.33 kHz channel spacing, and is TSO’d.

Don't Miss a Thing: Dual watch allows you to listen for transmissions on both your active and standby frequencies simultaneously, with the active taking priority at all times. Use dual watch to monitor an alternate frequency in busy airspace or listen to ATIS without missing anything on the active.

Designed for YOUR Panel: The SV-COM-PANEL is available in both horizontal and vertical versions so that you can craft your perfect panel. And, because the transceiver modules are mounted remotely, the control panel is only 1.27” deep. The SV-COM-PANEL is optional when used in AF-5000/6000 series systems, allowing pilots to preserve panel space for other devices.

Horizontal or Vertical Control Panel


25kHz Transceiver


8.33kHz Transceiver



  • Tune frequencies by airport and station type at the touch of a button
  • Send frequencies directly from SkyView
  • GPS-based reverse lookup of airport and station type for manually entered frequencies
  • Vertical and horizontal versions
  • Monitor your standby frequency with dual watch
  • Fully backlit, auto-dimming controls
  • One-touch flip-flop with remote trigger ability
  • Transmit indicator
  • Receive indicator with active/standby differentiation
  • Stuck mic indicator with transmit time-out

SV-COM-760: 118.000 to 136.975 MHz, 25 kHz Spacing

Transceiver Module Dimensions:
7.96" W x 1.02" H x 3.50 D" (202.2mm W x 25.9mm H x 88.9mm D)

SV-COM-760 Transceiver Module: 0.56 lb. (0.25 kg)

Power Input:
10-15 VDC

Transmit Power:
6 Watts
SV-COM-T8: 118.000 MHz to 136.992 MHz, 8.33 kHz Spacing

Transceiver Module Dimensions:
6.32” W x 2.11” H x 2.72” D (160.6mm W x 53.5mm H x 69.1mm D)

SV-COM-T8 Transceiver Module: 0.77lbs (350 g)

Power Input:
10-30 VDC

Transmit Power:
6 Watts

Control Panels Dimensions:
3.53" (89.7mm) x 1.80" (45.7mm) x 1.27" (32.4mm), available in vertical and horizontal versions

SV-COM-PANEL Control Panel: 5.6 oz (159 g)